3T ADURO HANDLEBAR
3T Cycling has issued a voluntary recall of the 3T Aduro handlebar in cooperation with the CPSC and Health Canada.
The recall includes handlebars on the P5-Six bicycle, frameset, and P5-Six upgrade kit. If you have a 3T Aduro handlebar that is affected, it can be swapped out by any authorized Cervélo retailer, quickly at no charge to you. Contact your nearest Cervélo retailer to find out if the handlebar on your P5 is affected and how to have it replaced.
3T AURA PRO HANDLEBAR RECALL
3T Cycling has issued a voluntary recall on the Aura Pro Handlebar. The recall includes handlebars on the P3 Ultegra and the P5-Three SRAM Red, sold between September 2012 and January 2013. Please contact your nearest Cervélo retailer to find out if your P3 or P5-3 is affected and how to have it replaced.
Cervélo has identified a potential safety issue involving the down tube loosening or separating from the head tube on some R2.5 frames. Therefore, Cervélo Cycles is voluntarily recalling a limited number of 2005 model year R2.5 carbon bicycle frames.
Although the 2005 R2.5 carbon road frame passed all the standard industry frame tests, this particular problem was not uncovered during those standard frame tests. Cervélo has now discontinued the R2.5 model. The currently produced carbon road frames do not use the same lug design and are not susceptible to this problem.
This recall only applies to 2005 R2.5 road frames with serial numbers greater than R251700. These frames could have been purchased as a frameset or built with Shimano DuraAce (red decals) or Campagnolo Chorus (blue decals). All affected R2.5’s have clear coating over carbon fiber – see photos.
R2.5 CHORUS MODEL
R2.5 TEAM MODEL
R2.5 SERIAL NUMBER AND MODEL LOCATIONS
If you purchased a 2005 R2.5, please contact your nearest Cervélo retailer to find out how to have it replaced.
WOLF SL FORK RECALL
Cervélo has identified a potential safety issue involving the Wolf SL fork. This fork is designed and manufactured by True Temper Sports of Memphis, Tennessee, using a blade shape supplied by Cervelo. All other aspects of the structural design, development and manufacture were done by True Temper Sports.
Under certain conditions, the fork steerer can crack and eventually break during normal use, which may cause the rider to lose control, fall and suffer potentially serious injuries. To date, there have been reports of injuries in the field resulting in minor abrasions and one broken wrist.
Though the fork passes US and international standards, this particular problem was not uncovered during those standard tests and the fork only showed this weakness in the field, typically after being damaged. After much work, we did develop a new test protocol that was able to replicate the same failure mode as seen in the field. If the fork steerer is damaged by impact (eg. by a crash, a fall from a roof rack, or another impact) then the damage may progress very quickly during use to complete separation.
We have seen that incidence of failure on this fork is higher than on other forks, and there is a potential for injury upon failure. True Temper Sports feels that the fork meets the industry standards and that the fork is therefore acceptable and no further action is required. Cervelo does not share this opinion and therefore, is proceeding with a recall of the True Temper designed and manufactured Wolf SL forks ourselves. True Temper Sports has declined to participate.
In order to conduct a recall one must be able to demonstrate that any replacement product does not display the same failure mode. We have demonstrated to the authorities that the forks we will use as a replacement - the 3T Funda Pro and the Easton EC90 SLX - pass all standard industry tests as well as the new Cervelo test that the True Temper Wolf SL fork fails.
We have obviously discontinued all use of the True Temper Wolf SL carbon bicycle fork. However, please note that this does not affect the Wolf CL and Wolf TT in any way, as both have a completely different structural design (and have passed the new Cervelo test protocol).
Although it is not usual for a third party to recall a product manufactured by another company, we feel it is a necessary step to take care of our customer, and we will proceed with the full recall at no cost to the retailer or consumer.
The recalled forks have a clear coating over black painted carbon fiber, with the words “Wolf Superlite” (Figure 1) and related logo just below the crown on each fork leg, and the words “SL” (Figure 2) on each leg above the fork blade dropouts. There is a True Temper CRTMC logo (Figure 3) on the inside of both fork legs. The recalled forks could have been included on the following bicycle models: R3, R3 SL, Soloist Carbon, Soloist Carbon SL, and certain P3 Carbon framesets and complete bicycles.